PrefaceChapter 1: Polymers, Composites, Functional and Building CeramicsKurgan Clays in the Production of Ceramic MaterialsActivity of Zinc Oxide Based Spinels CatalyticPeculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal LoadsMathematical Modeling of High-Energy Pressing Process of Graphite-Plastic CompositionImproving Construction Engineering Properties of Soils Stabilized by a Cement Binder with Techno-Genic ProductsImprovement of Strength Parameters of Foam Ceramics for Energy-Efficient Enclosing StructuresModeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and ClayDetermination of Rational Technological Parameters of Co-Extrusion Processing of Secondary Polymeric Materials by the Method of Physical ModelingReceiving Composite Sorbents for Sewage Treatment on the Basis of Waste of Production and Processing of Micaceous QuartziteImproving the Fungus Resistance of Polymer CompositesTechno-Genic Fillers in the Composition of Modern Polymer PaintsStudy of the Influence of Heat Treatment on the Structure and Properties of Aluminum-Copper Multilayer SystemsInfluence of Plasticizers on the Properties of Fine-Grained Polymer ConcreteAnalysis of Electron Density Distribution in the CuAlO2 SystemProperties of Epoxy-Diane Composites Modified by Techno-Genic FillersQuartzitic Waste, as the Possible Component of the Cement Flooring Composite MaterialInvestigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging MaterialsFormation and Corrosion Behavior of Nickel/Alumina NanocompositesReaction of Spot Radioactive Source with the Energy of 661.7 KeV on the Modification in the Structure of Surface Layer of Metal Composite MaterialThe Influence of Fiber Reinforcement on the Properties of the Self-Compacting Concrete Mix and ConcreteStudy f the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different CompressionModeling Stress Deformed State Upon Contact with the Bodies of Two-Phase MicrostructureInvestigation of Composition and Technological Parameters of Highly Porous Gypsum Products ObtainingA Study of the Influence of Thickness of Anti-Diffusion Layer on the Structure and Thermal Resistance of Composite 5-Cr-St3Improving the Bio-Resistance of Cement Concretes by Means of Fungicidal Poly-Functional ModifiersStudy of the Influence of Refractories Structure on the Thermomechanical Properties of Tunnel Kiln Equipment LiningStudy of the Suspension Stability of Titanium Dioxide of Anatase Modification for Self-Purifying Fine ConcreteComposition Material for Radiation Protection Based on Modified Disperse Titanium Hydride and Silicate ConnectingThe Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate CompositionComposite Materials Based on Plasma Treated Basalt Fibers for Heavy-Duty Concrete ProductsActivating Effect of Aluminum Chloride in the Technology of Poly-Sulfides and Materials Based on themPhysical-Chemical Studies and Evaluation of the Suitability of Chernoyarskoe Deposit''s Diatomite for the Synthesis of Foam GlassCompositions and Properties of Polymeric Concrete with Granulight AdditiveAssessment of Fire Safety of Coatings Based on Silicate Paint SolSynthesis of Ultra-Dispersed Spherical Composite MaterialsProspects for the Development of Building Ceramics, Based on Stale Slags from the Non-Ferrous Metallurgy of OrenburgThe Economic Efficiency of the Development of Dry Mixes with the Supplement Based on Calcium HydrosilicatesFace Ceramic Brick of Soft Molding Based on Opoka-Like Raw MaterialsFine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D PrintingThe Use of Water Treatment Petroleum Sludge in the Manufacture of Ceramic ProductsTo the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-Composite CompoundThe Conditions and Results of Ferrite Based on Multicomponent Crystal Formation in High Entropic Oxide SystemsCeramic Bricks of Semi-Dry Pressing with the Use of Fusible Loams and Non-Traditional Mineral Raw MaterialsThe Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car PartsRegulation of Electrical, Thermal and Physical Properties of Composites Based on Carbon-Modified Portland Cement MaterialsSimple Universal Kelvin Equation Valid in Critical Point Vicinity, External-Internal State Correction, and their Application in Understanding of Oxygen Capillary Evaporation and Condensation in Mesoporous Silica MCM-41Preparation of Poly-Substituted Crystals with M-Type Hexa-Ferrite Structure Using Melts of the BaO-PbO-SrO-CaO-ZnO-Fe2O3-Mn2O3-Al2O3 SystemThermal Stability of Nano-Crystalline Nickel Electrodeposited into Porous AluminaHeat-Resistant Composite Materials Based on Secondary Material ResourcesProduction of Foam Glass Materials from Silicate Raw Materials by Hydrate MechanismUse of Natural Biopolymers to Create Nanocomposite MaterialsAbout the Possibility of Recycling Water Treatment Sludge in the Wood-Cement Composites ProductionThe Influence of Temperature Testing on the Technical Data of Cementing TechnologyProduction of Hybrid Polymer-Oxide Materials Based on Molybdenum Oxide Compounds Using Transient Electrolysis MethodChapter 2: Steels and Alloys, Metallurgical and Metalworking TechnologiesThe Influence of Cylindrical Specimen Size and Material Properties on the Distribution of Deformation during Torsion TestHardenability and Wear Resistance of Carburized to Hypereutectic Concentrations SteelsThe Mechanical Properties of the Pipe Steel after Rolling at the Plate MillSimulation of High-Speed Cutting Using Deform 3D SoftwareFormation of Bead Shape, Structure and Mechanical Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition MethodTheoretical Investigation of the Bending Process of the Pre-Strained Metal SheetOn the Role of Gamma-Alpha Transformation in the Increase of the Fracture Toughness of Maraging SteelVerification of a New Torsion Test Method to Study the Rheological Properties of Materials in a Cold StateIncrease of Weld Joint Efficiency of the Combined Band of a High-Speed Rotor of an Electric Machine by Local StrengtheningAdvanced Statistical Analysis of Grain Structure in Single-Phase Materials Nanostructured by High-Pressure TorsionThe Use of a Magnetic Suspension for the Crucibleless Metal MeltingComputer-Simulation of the Billet Shape Change during Helical PiercingStudy of Electromagnetic Effect Parameters Influence on Fluidity of Fine Nd-Fe-B PowderThe Peculiarities of Smelting of Wear-Resistant Cast Iron IChH28N2 in the Induction Crucible Furnace IChT10Calculation of Phase Composition of α- and Near-α- Titanium AlloysHow the Material Thickness Affects 0.08% Carbon Cold-Rolled Sheet SteelInfluence of Thermomagnetic Treatment on the Damping Properties and Structure of Iron-Based AlloysEffect of Hf Doping of Commercially Pure Copper on Evolution of its Microstructure under High Pressure TorsionAbout Impact Strength and Thermal Properties of Steel MeltsThermodynamic Regularities of Nuclei Growth during Crystallization of Metastable AlloysDetermination of Thermo-Physical and Physical Properties of Complex Alloyed BrassIncreasing of Energy-Power Indicators of Mechanical Processing in a Planetary Mill by the Use of a Working Chamber with a Square Shape of the Internal CavityEffect of Friction on Compression Test of Ti-6Al-4V with Open-Cellular StructureInvestigation of the Effect of Oxygen Content in the Auxiliary Process Gas on the Quality and Speed of Laser Cutting of Steel SheetsScientific Approaches to the Development of Titanium-Based Alloys for Medical ImplantsPhase Equilibria in a Liquid Metal of Fe-La-Ce-O System at 1600 °Investigation of Sulfatization Mechanism of Iron-Manganese Concretions in Fluidized BedInvestigation of the Austenite Grain Growth in HY-TUF SteelPlastic Twisting of Erect Metal RollerEvaluation of the Friction Factor Influence on the Results of Cross-Wedge Rolling Simulation in Qform SoftwareThe Method of Testing Cylindrical Specimen for Torsion in Order to Determine the Rheological Properties of Materials Sensitive to the Strain RateMicroanalysis of Additive Products from Electro-Erosion Cobalt-Chrome PowdersModeling of Tool for Cold Extrusion of Steel and Tooling with Proportional BandagingPrediction of Blast Furnace Thermal State in Real-Time OperationInfluence of Powder Layer Thickness on Microstructure of Selective Laser Melted TiAl6V4Cast Iron and Steel Smelting in Induction Crucible Furnaces of Industrial FrequencyYoung Modulus at High TemperaturesCrystallographic Peculiarities of β-α Transformation in Brass Induced by Hot ExtrusionDetermination of Contact Pressure during Double-T Section Rolling in Universal Beam Grooveutomatisation of Calculation Method of Technological Parameters of Wiredrawing with Account of Speed Factor and Material PropertiesAppication of the Complete Material Balance Method to Estimate the Transition of Elements in Flux Cored Arc WeldingThe Effect of Radial-Shear Rolling on the Microstructure and Mechanical Properties of Technical TitaniumEffect of Powder Fraction 09CrNi2MoCu on the Structure and Properties of the Obtained Samples Using the Direct Laser DepositionImprovement of Methods of Calculation of Forces in Hot Strip RollingInfluence of Chemical Composition and Heat Treatment Modes on Mechanical Properties of Titanium Alloy VT22 BarsModifying of the Surface of Products from Cast Iron as the Element of Production ModernizationMethod of Speed Mode Correction of Rolling Pipes in the Reduction MillThe Study of Structure Formation Evolution at High Pressure with a Shear in a Corrosion-Resistant Austenitic-Ferritic Steel 03Kh14N10K5M2YuT with Different Initial StatesProcess Development for Solid Fuel Use at Siderite Ore Roasting in Shaft FurnaceThe Phase Composition of Products from Electro-Erosive Cobalto-Chro.