Part A: Postgraduate Lectures.- Berta Pi Savall: Experimental Analysis of Strain and Thermal Behaviour on 3D-Printed Flexible Auxetic Structures.- Caroline Treib: Crack Evaluation of Ozone-Aged Elastomers.- Dominik Hahne: Selective Laser Sintered Pipe Specimen Under Torsional Load: Experimental Investigations and Material Modelling.- Johannes Rottler: The Importance of Heat Conduction and Global Temperature Fields in the Laser Powder Bed Fusion Process.- Julian Klingenbeck: Investigation of the Anisotropic Mechanical Behaviour of Short Carbon Fibre Reinforced Polyamide 6 Fabricated via Fused Filament Fabrication.- Enes Sert: Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens using Surface and Heat Treatments.- Yvonne Breitmoser: Sorption of Fuels in Additively Manufactured Thermoplastic Polyurethanes.
- Stefan Brenner: Distortion Compensation of Thin-Walled Parts by Pre-Deformation in Powder Bed Fusion with Laser Beam.- Jens Kortsch-Banzhaf: Investigation of the Thermophysical Properties of Porous Steel Components made by Selective Laser Melting.- Johannes Schmid: Analysis of the Heating Behavior and the Strength of Hot Gas Welded Polyamides with 3D Contours Using an Immersing Nozzle System.- Julius Cronau: Simulation of Lattice Structures with Johnson Cook Material and Damage Model.- Lea Strauß: Effect of Residual Stress, Surface Roughness and Porosity on Fatigue Life of PBF-LB AlSi10Mg.- Michael Ascher: Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive.- Lucas Schraa: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method.- Maha Zaghdoudi: Analysis of Heterogeneous Ageing of HNBR O-Rings.
- Ondrej Farkas: On the Characterisation and Modelling of the NR-BR Blend Under Harmonic Excitation Considering Self-Heating Effect.- Philippe du Maire: Thermal Katharina Knape: On theWays to Numerically Implement the Two-Time-Scale Approach.- MirnaOsama: Development of Site Calibration Set for Prefixed Wall Transmitters of Environmental Monitoring Systems in Regulated Industries.- Part B: Overview Lectures.- Holm Altenbach: Continuum Mechanics - Material Independent and Dependent Equations.- Andreas Öchsner: Mechanical Behavior of Classical Sandwich Beams.- Leonhard Hitzler: Classical Solidification Structures in Single-Step Metal Additive Manufacturing.- Markus Merkel: Additive Manufacturing as a Key Driver in the Mobility of Tomorrow.